You welcome the channel "Fishing chips" in the previous article I talked о Tom, how to smoke fish without smoking Today I will tell you how I did a wobbler
Double-month isolation and a bunch of free time, which has nowhere to occupy. It was at that moment that I decided to try to make a wobbler for catching the perch, which would not be distinguished by my game from the shop and cost the most cheap. Yes, and since childhood I was drawn to the manufacture of tackles with my own hands, something is in them attractive.
First you need to decide on materials and tools. Which will be needed for the manufacture, as well as the shape and drawing of the wobbler. Here I will not exhibit, as there is a bunch of "comrades" who will begin to write about their "unique wobbler, which mows all the fish." And since, mostly, these writings have no idea what size is it, they will only write Ahinea) who will need the size and drawing in general, write in the comments, I will be happy to share!
- Linden bar
- Steel wire 1mm
- Piece of plastic for the blade
- Stationery knife
- Adhesive Second
- Ship varnish
First of all, we transfer the drawing of the wobbler to the scotch and ask him the future form
Next, sticking to the future wobbler Scotch voltage circuits and cut out the stationery knife, linden - soft material, easy to handle
Next, we repeat with the template vertical (The template will be in the drawings) And start rounding the sides using templates. After sending it to "boiling" so that the tree is closed less water. I soaked in conventional vegetable oil that rolled onto the stove
Now one of the most important processes begins. We cut the workpiece in half to press the contours for wire and its lamp. The contours pushed the usual ballpoint handle, and the hole for the Load was drilled.
After that, I can go with a wire under these contours, as well as insert the ship. Glue epoxy. I had quick-drying and I continued to work literally in an hour.
Now we need to position correctly and insert a shovel so that the wobbler actively played and opened no more than 1 meter. Let me remind you that his goal is to collect an active perch. The blade was also glued with epoxy resin.
This, probably for me was the most difficult moment, because with paints I do not have much experience. But once began to do, it was already stupid to complete. On the Internet spied interesting technique using aluminum foil, so that the wobbler was more glossy and, since the structure is impaired, it will resemble the scaly. The shovel had to pull out, it was a mistake to insert it immediately, it is still better to do this at the end of the manufacture, otherwise it will not be possible to stick foil qualitatively.
Foil glued all the same epoxy, but many glue to ordinary second adhesive, here I think it is not so important. Next, paint. As a foundation took a green color and put it from the back to the abdomen so that the belly was lighter.
Next, we already bring to mind, we remove the extra paint, we can paint any patterns that your soul are wrapped with varnish, as I said above used a ship, although it dries a long time, but it lies rather evenly and keeps reliably. After drying, we put the fittings and fishing.
That's such a wobbler I got. At the calculation of the spent materials, I went on it about 30 rubles, there was a lot of everything left. I will say honestly, the fish still did not catch it, just because he walks with him only one fishing, and the wind that day was such that anything could not go about any fish. But I can say that the experiments in the bathroom did not go in vain and I got a really high-quality wobbler with a very active game, I think on a good day the perch does not stand from such a handsome.
Do you make homemade tackle? If yes, then share in the comments, it will be very interesting to see. I also repeat who will be interested in its manufacture. Write in the comments, I will definitely contact you and give drawings. In open access I will not fundamentally lay out, since in a month all Zen will be scored by such articles.
I have everything on this. If any questions remained - ask in the comments, I will gladly answer! Finally, I would like to wish you more than fishing. Thank you for your attention if this article has been interesting for you. subscribe to the channel .NCHHF!
Making wobblers I took over 15 years ago. Prior to that, I successfully caught a lump on the spinning spacing. Sudak - only on the curtains to the fry. In the journal "Fisheries and fish farming" saw pictures of the first wobbler Rapala, and the thought was ripe to sharpen like a tree. At that time, there were no them in our city.
The first wobbler copied with the original floater. Painted as he could, giving the color of the perch. And what was my surprise - on the first fishing I caught a good perpetrator. Since then, he suffered in wobbler-building. Over time, invented new forms. Redid a lot of wobblers, but this first one did not succeed - he stably caught Sudak. Pikes ignored him, but Sudak just adored. For several years I caught Sudak to this wobbler, even periodically repainting it.
Well, now let's go to the main thing - how to make a wobbler with your own hands. There is nothing difficult here. Minimum tools and sweater materials. The whole process will describe briefly - otherwise the article will be very long.
Making the workpiece
To begin with, we select the necessary bar - everything is suitable, except for heavy and resinous - pine, we immediately note the birch.
Place the size and scolding the workpiece.
Next, in the workpieces we do longitudinal cutting under the loop and the front to the blade.
Longitudinal - at a depth of no more than 7 mm, under the blade too, and strictly perpendicular to the longitudinal. The angle of inclination depending on which bullet is required.
Next, we need a stainless wire and a blade material - it may be a plexiglass or, as in this case, fiberglass.
From fiberglass, we cut off the workpiece under the blade - a small rectangle.
It is more convenient to do it on the machine with a circular cutter, but you can and with a metal with a metal.
The main billets are made. Next, proceed to creativity. We draw from the workpiece the form of your favorite wobbler - this process should be done very carefully - gradually give the shape with a sharp knife.
Next comes final abrasive. I use a porous stone and skins of different grains.
We collect together
After the workpiece is polished - we make a loop. For this it is necessary for Passatias, round-rolls and motors of threads. Well, respectively, the wire.
The loop is done as a photo in the size of the bait. After that, the ends are wrapped in a thread - it is necessary for the hinge tightly sat down in a longitudinal cut.
And insert the loop inside, follow the hinges evenly performed.
Next, we take the blank of the blade and a thin supfyl make a small dutiful in the middle, otherwise the loop will not give her to go.
And insert the blade.
After that, fasten the blade and loop with several drops of superclas. After the glue is grabbing, give the blade the desired shape. Do it best on sandpaper.
Next, the longitudinal slot is filled with any filler. I use acrylic liquid nails, indulging in the gap from the pistol. After the hardening, plastic is obtained, and it can be treated with supfil.
We mean and paint
Preparation is ready. Next is the process of impregnation and painting. In this case, this wobbler will be covered with foil.
It makes no sense to paint painting work - here everyone is fading as it can. The main thing is the process of making the workpiece under painting is simple and understandable.
And most importantly - made with love Wobbler catches better famous brand brands.
Maybe my technique of manufacture of wobblers will come in handy. There is nothing complicated here.
And here is a wobbler who did in the article is ready for exploitation. The shovel did not accidentally made from the glassstolite - the fish is mostly on the stones, and it happens, the blades break - then the church begins to jerk so while pulling it on the stones that the blades fly away, then we melt in the dark and instead of water on the edge of the stones from all. Plastic is not iron - from a strong impact is laid down. This disadvantage is deprived of the blades of a glassstolite - you can somehow shove them on the stones - it will not work out.
Production of wobblers Interesting and quite affordable occupation for each fisherman. Owing small joinery and plumbing skills can make a fairly effective bait capable of lining the fish with their game and attractive, similar to the real food object, view. The embodiment of ideas in reality will not require a lot of time, and the material part, taking into account the equipment suitable for the production of work and the tool is not different something special. Materials and tools for the manufacture of wobbler will be almost in every household, especially since most avid fishermen, as a rule, do not neglect the possibilities of making self-containers, which can increase the efficiency of any direction of fishing and save a family budget.
The article submitted to the reader will highlight the production of wobblers at home. Invite the fisherman of the direction in the choice of the most suitable materials for these purposes and determine the tool kit necessary to perform work. After reading this information, the spinningist will be able to replenish the arsenal of his bait by the unique exclusive wobbler, endowed with the individual qualities of the game.
Advantages of homemade
Production of wobblers with their own hands has a number of advantages over purchased products. As you know, wobbler, no matter how much it wanted, is included in the category of consumables, providing a fishing process. Loss of bait is not uncommon in the spinning fishing of a predator, inhabiting in hard-to-reach places of water bodies with many underwater barriers that can tightly sit on the tees of wobbler and break the cord. Purchased bait to this day have a high price and loss of each, constantly causes annoliga annoyance. Homemaking costs a much smaller price, and it will not be a great deal of great work on the remaining drawings and notes. The price factor is considered the main advantage of homemade.
No less important will be the preparation of individual work properties, which in narrow specifics the master gives wobble to special conditions of fishing on certain reservoirs, examining the preferences of fish as a result of the practice of previous fishing. Another advantage can be considered the possibility of changing the color design of homemade. After all, the color can be radically changed or modified by adjusting the desired promising spectrum at home right after fishing, based on the experience of the last fishing experience. The same can be done with a picture of the game, changing the settings of the homemade wobbler for fishing.
Selection of material
Getting Started with Wobbler with your own hands, the first priority is a definition with the material of the body of the product. The remaining elements of the product of special differences in choosing the type of materials do not have the framework, and the blade of wobblers in various variations of the bait body are taken in the same materials. Only paint coatings of homemade can be replaced in the compositions, which are selected on the basis of the final planned production results. In the following sections of the article, we will discover in more detail on the principles of the approach to the choice of material and possible embodiments of their use in the manufacture of self-made bait.
The housing is the basis of the homemade wobbler into which all the auxiliary elements are mounted. The selection of the material initially lays certain qualities of future bait, affecting the working characteristics of the wobbler. For example, the selection of the case material reaches such parameters as the buoyancy of the products. The presence of various density of the bait housing will not require shipment for the blowjob or vice versa, to hold the wobbler on the surface of the water. A primitive wobbler from a toothbrush with their own hands can be collected in a matter of minutes, not particularly locating at its narrow operating parameters, hunting for active predatory fish. But we will look at a more careful approach, choosing solid frameworks of the future products from durable materials.
The cheapest and affordable material for the manufacture of wobblers is a tree. Will not forget to say that the very first, already classic wobblers, were made precisely from wooden chips. Wobbler made of wood is distinguished by high initial positive buoyancy, and billets of support for processing and attaching the forms necessary for geometry without the use of high-tech equipment. Most often for billets take Olhu, Lipa Balmit and Cork. Olha is rather solid and complex in processing material. Lipa solid, but easy to handle type of wood. Balz, despite the hardness, has the highest properties of buoyancy. The plug, having a high buoyancy, is characterized by soft and fragility, requiring special accuracy in the manufacture of the product.
Self-creation is successfully prepared by applying synthetic materials, without which it is difficult to introduce a modern fishing business in our time. It is convenient and easy to process such material as polystyrene foam.
Important! For the manufacture of wobbler, it is worth choosing extruded, that is, with a high density of polystyrene foam, which is much more reliable in operation and durable to use.
In addition, their preliminary preparation and painting itself is much easier to perform than operations with soft species. Another reliable and cheaper material for blanks is the polyvinyl chloride synthetic substance, which is better known under the PVC abbreviation. This is a soft substance that is quite easy to process.
A distinctive part of most types of wobblers is its blade or language. This is a worker that affects the shock blowing and drawing of her game. The blade should have a significant hardness in aggregate with a slight weight and plasticity, be little susceptible to abrasion and withstand loads from microudars, which is characteristic of deep-water models, about the soil of water bodies. Most often, the blades are cut out of metal or tinted with a thickness of 1-2 mm or are made from a viscous and resistant to mechanical effects of plastic polycarbonate with a thickness of 1.5 - 2 mm. These variants of the blades are well processed under the form necessary under the conditions of the form and reliably paste into the framework of blanks from various types of materials.
Any homemade wobbler includes a metal framework, which is designed for mounting tees and bait connection with the main tackle cord. The frame is made of a steel wire with a diameter of 0.3 to 0.6 mm, arranging fastening and wrecking with bends or twist. It is preferable to use stainless steel, but with its absence even carbonaceous steel treated with anti-corrosion coatings, serve quite a long time. Subsequently, the frame is inserted into the bait housing. His visually, its presence in the product is noticeable only on the arms of the homemade hinges.
Shipment Self-timers produce for balancing bait, giving it special properties of buoyancy, aerodynamics and game style. For these purposes, they use a hunting fraction in various diameters, cutting lead crushers used to ship float snaps, as well as all sorts of metal plates of different shapes and masses suitable by parameters to give the bait of the necessary scales. Mostly, shipment is introduced into the body of the bait, and in some cases even the empty blades are loaded, such images reaching the optimal balancing and the desired immersion horizon.
paints and varnishes
After assembly and shipment, homemade wobblers are painted. Preparatory layer is prepared for its finishing painting, using primers and epoxy resins, which is better in the paint. In soils and resins used on the basis of the workpiece material, paint are most often BT-177 or any waterproof enamel in various color variations. After finishing color to maintain the stability of the color and giving the strength to the stained layer of the product are covered with varnish.
In order for the fisherman to make a wobbler need to prepare a number of tools and equipment that will help alleviate and speed up production. To perform work Required: Personal cooled knife, Handsman for metal or an electrolybiz with a shallow saw, screwdriver with a set of rolled wood on a tree of various small diameters from 0.5 to 3 mm, pliers, small hammer, Flame with small shells, Nadfili, sandpaper 0.1 and 2 rooms of abrasive coating and tweezers. From the equipment, it will be necessary for vice from the equipment, allowing reliably to record and subsequently make the processing of the workpiece.
The main stages of manufacture
The whole process of the production of homemade wobblers can be divided into steps. It will give a clear algorithm to perform work, including the preparation of workpieces and materials and the adjustment of the already collected product. The most understandable logical path of production looks like this:
- Production of basic parts: hulls, blades and frameworks for the workpiece;
- assembly of parts in the product;
- test and debugging of the working parameters of the self-model;
- Finishing, applying paintwork coatings.
How to make a wobbler do it yourself
Having read the main stages of production, the fisherman remains to develop an independent plan for the manufacture of a wobbler or, without bothering in unnecessary meditation, follow the plan further plan, which will lead to achieving the desired result.
Manufacture of housing
Production of the housing, perhaps the main and quite important point of production. It is in this part of the work it is to decide on the type of wobbler and its main characteristics, which will serve as source data for the selection of material and the set of tools for work.
Important! Production of the case in the process of performing all the work occupies a lion's share in the design of the self-made.
The final quality of the product depends on the accuracy of the geometry of the forms and accuracy of the assembly slot.
Wobbler drawing can be taken from the Internet, and it is possible to use the factory product for these purposes, putting it on paper and making a stroke through the contour of the body with a pencil with subsequent lines in the perfect condition. For the drawings and sketches, it is better to use a dense thin cardboard, with which it is more convenient to work when the contour of the product is simply on the wooden or plastic blank itself, pre-prepared for the size of the future homemade.
Making a rough model
After transferring the contour to the workpiece, cut the part along the lines that the sketch carved from the cardboard was circled with a fine-grained saw. The perico knife is brought by coarse forms of sleep to smooth lines, removing as much excess material as possible. From the bottom of the workpiece along the length of the whole body, we cut off the framework of the frame, and in the front of the corner, it was cut to mount the working blade.
Making a blade
A drawing of the desired shape is performed on the blank for the blade for the blade, and the blade or the plastic polycarbonate is cut or the lord of the bait. The edges of the working element are processed by emery paper or supfil before eliminating all the burr and smoothing forms. Processing plastic, inspect the cut part in the absence of pores, chips and cracks both from the edge of the element and inside the material. The missed defect affects the reliability of the blade operation during operation.
Frames make a piece of steel wire. Choosing the size, take into account the idol for the formation of the loops on the element. The framework will consist of two loops of the ears or rings at its endings and one bend at the length of the part. The final rings are used to fasten the rear tee and front carbine, the bend for mounting the central or lower tee.
Build a wobbler from solid material
Prepare the components of the homemade, proceed to the assembly of the product. The frame is inserted into the lower slot of the housing and poured with epoxy resin, after drying, the sandy paper is removed. The blade in the slot from the front of the product is sled to glue or attach a pin, drilling the body and a wobbler's blade subsequently connecting them with a stuffing glue. In the case of need, shipment of wobblers produce, symmetrically, with the sides, introducing a crushing into the body or mount lead plates into the body.
Collecting the design of the bait, proceed to the tests.
Important! The easiest is the first tests in the bath filled with water.
The fastener line ties the cutting of the fishing line and begin to hold the bait, tracking the speed of the shock, the manner, the rhythm and the stability of the game. If necessary, the tuning of the wobbler is performed by additional shipment, the flexion of the fastener loops and the change of the angle of the blade. Having achieved the required parameter, you can proceed to the finishing processing of an exclusive wobbler.
Assembling bait made of soft material
Assembling the bait made of soft material has differences compared to the assembly of a wooden wobbler. Of the soft materials, the housing of the bait prepare from two mirror parts, in which the slots are made under the frame and the blade. The frame is inserted into one part, after which the wobbler glue into a whole product and after that they will be mounted, again applying glue, blade. After drying the glue, the sandy paper is cleaned with influx, the wobbler is equipped with tees and get started.
After positive tests, the size and form remain unchanged, and the product itself is subjected to a thorough visual inspection on the presence of cracks, pores and small chips. The so-called finish treatment of bait is performed. Microdefects are screwed down by sandpaper and poured with drops of epoxy resin, excess after complete solidification is removed with zero sandpaper. After that, the product is ready for a draft and finishing color.
In practice, there are several color options, we will consider two of which we will consider in the continuation of our article, and the fisherman will choose the most appropriately suitable for the pike or other, which interests it in the home of the fish.
With the first way the color, the tested product is primer preferably in white or gray, which is contrasting the main paint is applied. Baits made of soft and porous material, for example, a wobbler from traffic jams will have to be twice. After drying, the soil is starting to color the main colors, inflicting, according to a fisherman, a combat and promising pattern to a new wobbler. For dried paint, the bait is twice with deck varnish.
The second way in color will require more diligence and time. It begins with the complete perch of the wobbler into the epoxy resin, followed by frozen the composition. Occupation operation is twice. After repeated drying on the wobbler, the future drawing is shoved, and if the product is painted in a monophonic color, the housing is wiped with sandpaper to a velvety surface. Giving the surface into one of the above states, the bait is painted with waterproof paint and after drying twice with deck varnish. The method is ideal for finishing soft wobblers from foam, additionally strengthening and reinforcing epoxy resin their surface.
Foam or plastic
The foam or plastic is suitable for rapid manufacture let the one-time, but effective bait. Material is cut with a knife or hacksaw blade like an insect, for example, the May beetle.
Important! The plausibility of the bait is not an essential factor, good luck brings competent feed and realistic wiring.
The cut out of the workpiece is soaked and tighten through it a rigid wire, forming a fastener loop and an eye for mounting a tee. This option is great for the manufacture of surface bait known spinningists like a wobbler displaced.
Fish from foam rubber
From the foam rubber enough to simply collect wobbler-composure. This will require a dense foam and wire. Cutting the first link in the form of fish head and even a triangle, the element is drawn onto the wire, arranging two loops at its ends. The second part of the wobbler is cut out like the tail and by analogy with the first part, it is driven onto a wire with a loop device. Now it remains to connect the central loops among themselves, having received a two-stroke fish as a result. A tee is mounted from the tail, and the front loop serves to connect to the cord. By changing the bait, Cheburashka can be comfortable and most importantly, lucky luck, pike perch and pike.
Wobblers came to replace the classic brilliance, better imitating fish behavior. Wobbler structures began to gain momentum during the deficit period of bait. Now you can choose the factory model for the price, appearance and properties. But part of the fishermen prefers to make them independently, and sometimes homemade wobblers are superior to factory counterparts.
Types of wobblers and their characteristics
Before the start of the manufacturing process, you need to get acquainted with the adopted classification of bait. You can make several wobbler with your own hands for various fish breeds, fishing conditions. With design and characteristics are determined in advance.
Types of bait:
- By the nature of behavior in water - floating, sinking, balanced and superficial. Determined by the ratio of the material with buoyancy and without it.
- In form. Crowler is the optimal wobbler on the chub. A variety of rotational movements provide a wide blade in the front of the design, the remnants are located behind. However, due to the complexity of the design, their repair is difficult. The homemade wobbler from the toothbrush is made in the form of Popper. He has a small cut nose, there are no blades.
- Length and weight. Depends on the size, weight and nature of fish behavior. Recommended length - no more than 15 cm. The mass affects the choice of spinning.
Independent wobbler structures require special attention to the preparatory stage - the choice of drawing, the material of manufacture. As the basis, you can take a factory model and make a number of improvements to its parameters.
Drawings for manufacture
For the manufacture of wobbler, you need to make a scheme. It will include not only the list of materials, but also their characteristics - size, mass, location and method of attachment in the design. The simplest model consists of a floating body made in the form of fish. The longitudinal incision is installed wire with traps. It also performs the functions of the load. The blade is mounted in the nose.
The advantage of such wobblers is the ability to make repairs in the field. However, they do not have an important factor for bait - no sound waves. Therefore, it is better to make a complex wobbler with your own hands on the recommendation of the professional.
It consists of such parts:
- The hollow case divided into three cameras.
- Large and low noise chambers located in the frontal part of the bait. Small plastic balls are placed in them to generate sound waves.
- Places for fastening hooks.
The disadvantage is to repair a similar design problematic. For the manufacture of such a wobbler, the beetle will need a complex operation for the formation of cavities in two parts of the workpiece. Recommended material - wood.
Selection of material
Most often for glitter and wobbler use wood. This material is easily repaired, processing and has due buoyancy. For independent proceedings, you need a minimum of tools that are available in any domestic workshop. You can use other materials.
The foam wobbler is used to catch the surface of the water. It is relevant for places with abundant vegetation. Polyfoam has good buoyancy. For the factory model, you need a minimum blowout up to 20 cm, which may affect the quality of fishing.
Recommendations for the manufacture:
- Choose a foam with a maximum density indicator;
- For external processing, fine-grained emery paper is used;
- When installing the insoles and the blades, special glue uses;
- A small piece of lead is mounted in the middle part for shipping - minor shock.
The advantages of these bait - they can be quickly made, the repair is made on fishing. It is enough to fill with glue damaged part of the design and wait for the final hardening. This is the best pike shoes for summer fishing.
The classic bait was originally made of wood, while the models made of plastic were replaced. The billet makes from any girlish piece of wood, to accuracy you need to use patterns. Cutters for wobblers do not do with their own hands. It is recommended to purchase factory to avoid twisting the fishing line.
Tips for the choice of material and manufacture:
- The easiest way to make a wobbler from cork or other soft wood - cedar linden or pine.
- A complex bait with sound chambers make a composite of two parts. First, one part is made and a mirror is made by its sample.
- For fine work, engraver is used.
Special attention is paid to glue. It should not be dissolved in water, at the same time give the compound required reliability. For repair it will be necessary to disassemble the bait, which often leads to its breakdown. Exit - to make several single-type models for operational replacement on fishing.
The video material presents detailed instructions for the manufacture of wobblers with their own hands:
If you need to repeat the form of the factory model as much as possible - it is recommended to make a wobbler from epoxy. This requires a form of solid plasticine or clay. On the plate there is an impression of bait from two sides. In the future, these recesses are filled with epoxy resin.
Before making a wobbler, you will need to perform a number of preparatory actions:
- Select form material with minimal moisture content. After imprint it is desirable to freeze to save contours.
- The composition of the aggregate. The basis use ECF or EDP. It is necessary to 9 parts of the resin, one piece of glue and 8 parts of shallow shavings.
- For floating models after pouring a resin of one part, a wooden insert is installed.
The final stage is grinding and installation of tackle. Previously in tanks with water is tested for buoyancy. If required - the ship is added. Repair of such a bait is impossible.
Wobblers made of brushes do not have proper characteristics. Tips for experienced fishermen - spend more time and means to make a truly effective bait.
Hi, I am Alexander-ideological inspirer blog. I associated my life in terms of career and free time with the forest. And how otherwise, when you live in Karelia! In this blog, I am responsible for sections dedicated to hunting, hikes and equipment. You can come to my world!